Chimney, Fireplace and Stove Services in Greater Burlington
Chimney and stove services go by trade names, and most people arrive knowing something is wrong without knowing the word for it. Read this list by symptom, not by service name. If a flue has deposit in it, that is sweeping. If you need to know whether the system is sound, that is inspection, and the situation decides which of the three levels. If water is getting in, the answer is one of three components and the symptom tells you which. If the appliance itself is misbehaving, a stove that will not hold a low burn, a pellet auger that jams, a gas pilot that will not stay lit, that is appliance service and it is a different visit from a sweep. And if the chimney is structurally failing, the choice is between repairing, rebuilding and removing it, which is a decision worth pricing all three ways.
Sweeping and inspection are not the same job
Sweeping removes deposit; inspection assesses condition. They are ordinarily carried out in one visit because a clean flue is far easier to examine, and they answer completely different questions. A chimney that needed no sweeping this year can still have a cracked tile, a failed crown or a bad appliance connection. Booking one and assuming you got the other is the most common misunderstanding in this trade.
The chimney and the appliance are two different systems
A wood stove and the flue it vents into fail independently. Gaskets, firebrick, baffles and combustors are appliance work. Deposit, tile, liner, crown, cap and flashing are chimney work. Plenty of problems that present as an appliance fault are a flue problem and the reverse is also true, so a good visit looks at both instead of only at the thing you rang about.
Prices, emergencies and who does the work
Prices come from the independent company that visits your property, since that company quotes and performs the work. There is no emergency dispatch here, so anything happening right now is a 911 or gas-utility call before it is a service call. Crews, certifications and years in business belong to the company that does the work.
Which service does your situation need?
Read down the left column for what you are experiencing, not for a service name.
| What is happening | Service | Same visit as a sweep? |
|---|---|---|
| A season of burning and no cleaning | Chimney sweeping | Yes, this is the sweep |
| You need to know whether it is sound | Chimney inspection | Yes: Level 1 ordinarily pairs with it |
| Buying, selling, or after a fire | Chimney inspection, Level 2 | No: a separate, longer visit |
| Water appearing inside | Caps, crowns and flashing | Possible; the access is the same |
| Mortar or brick failing | Chimney repair and masonry | No: seasonal, and a separate scope |
| The flue is cracked or unlined | Chimney liners | No: a project in its own right |
| The stove will not hold a burn | Wood stove service | Often, if booked together |
| The pellet stove keeps shutting down | Pellet stove service | Its own visit; different work |
| The gas pilot will not stay lit | Gas fireplace service | No: a different appliance discipline |
| Clothes take two cycles to dry | Dryer vent cleaning | Yes, frequently combined |
Twelve services, by what they address
Chimney Sweeping
Deposit removal on an interval set by what you burn.
Late summer through fall, before the heating seasonChimney Inspection
Level 1, 2 and 3: the situation decides which you need.
Year round; before closing on a property saleChimney Repair & Masonry
Repointing, spalled brick, crowns and structural masonry.
Spring through fall, while mortar can cureChimney Liners
Relining, and sizing a flue to the appliance, not the space.
Year round, weather permittingWood Stove Service
Gaskets, firebrick, baffles, combustors and installation.
Late summer through fall; parts lead times matterPellet Stove Service
Deep cleaning, augers, igniters, blowers and venting.
Late summer through fall, before first firingFireplace Service
Fireboxes, dampers, smoke chambers and draft problems.
Year round; draft problems are diagnosed in cold weatherGas Fireplace Service
Ignition, burners, glass seals, venting and CO safety.
Late summer through fall, before first useCaps, Crowns & Flashing
The three components that keep water out of a stack.
Spring through fall for crown work; caps year roundChimney Rebuilding & Removal
Rebuilding from the roofline, or taking a dead stack down.
Late spring through early fallDryer Vent Cleaning
Full-run lint removal and venting corrections.
Year roundUrgent Chimney Problems
Stop-use situations, and which call comes first.
Year roundChimney Waterproofing
Warm, dry, settled weather: a genuine seasonal windowChimney Repointing
Spring through early fall, while mortar can cureSmoke Chamber Repair
Year roundFirebox Repair
Year round; curing time means the fireplace is out of use brieflyAnimal & Nest Removal
Nesting season shapes what is lawful; capping is year roundTop-Sealing Dampers
Year round, roof access permittingReal Estate Chimney Inspection
Year round; turnaround is tightest in fallChase Cover Replacement
Warmer months for roof work; urgent leaks assessed year roundCast-In-Place Lining
Warmer months; the material has curing requirementsWood Stove Installation
Book in summer: parts and permits both take timeOil & Propane Flue Service
Before the heating season, alongside the appliance serviceCommercial Chimney Service
Programmes scheduled in summer for the following seasonTwo things worth reading first
How a request becomes a booked visit explains what happens at each step and what you get out of it, including the check that comes before everything else. If a term here is unfamiliar, the plain-language chimney glossary defines it without assuming you already know the trade.
Common questions about choosing a service
I do not know which service I need.+
Start from the symptom, not the service. The problem pages are organised by what you are seeing, smoke in the room, water getting in, a stove that will not draw, and each one maps to the service it turns out to be.
Can one visit cover several of these?+
Frequently, and it is commonly the sensible way to do it. A sweep and a Level 1 inspection are a natural pair, and access for crown, cap and flashing work is the same access, so doing them together avoids paying for it twice.
Do you do the work yourselves?+
This site is the local point of contact for your request. The assessment, the quote and the work are carried out by an independent qualified company serving your town, and that company is responsible for its own insurance, contract and workmanship.
What does chimney work typically cost?+
Liners run $900 to $3,800 installed and a cracked crown $300 to $2,200 to repair, according to published 2026 cost guides. Those are national estimates; the company that visits quotes your job.
Which services have a season?+
Anything involving mortar, repointing, crown casting, rebuilding, bedded flashing, needs curing temperatures, so it runs about spring through early fall. Sweeping, inspection, appliance service, cap fitting and relining run year round.
How quickly can something be booked?+
It depends heavily on the time of year. September and October are the busiest weeks by a wide margin. Summer bookings get a choice of date and leave time for parts to be ordered if the visit turns something up.
Do you cover commercial or multi-unit buildings?+
Often, though they raise access, roof and sometimes building-management questions a single-family house does not. Say what kind of building it is when you get in touch so the right approach is planned instead of discovered.
What if the problem turns out to be something else?+
That happens, particularly with leaks and draft complaints where the cause is frequently not the component people expect. A visit that establishes the actual cause is worth more than one that carries out the work you guessed at.
Is there anything you will not do?+
This is not an emergency service. A phone number appears only once a staffed line stands behind it, and certifications, crews or years in business are never claimed that are not ours. Those are intentional limits.
Do you work on unused chimneys?+
Yes, and they are worth attention. A dormant flue still passes through your building, collects debris and nests, and may be unlined. Inspecting and then either using or correctly sealing it is better than leaving it in between.
What about dryer vents: why is that here?+
Same problem, same tools, same access. A duct that accumulates a combustible deposit and vents to the outside is chimney-technician work, and the rotary equipment that cleans a flue is what clears a long duct run correctly.
Can I book several properties at once?+
Yes, and landlords and property managers frequently do. Scheduling several units together is much easier in summer than in October, when coordinating tenant access across a portfolio becomes the constraint.